Product Description
FTTH CATV Optical Transmitter 1310nm
Product Description
Transmitter series is a practical, high index, multifunctional and short distance transmission products, is the construction of CATV HFC network equipment.
This machine adopts the high linearity, low chirp DFB laser as light source, RF drive part adopts advanced predistortion compensation and closed loop AGC,APC, ATC control, to ensure that the excellent performance, and make the optical receiver output level is constant, various working parameters by the micro processing control, optional SNMP network management software and 1+1 power supply backup, chassis temperature can achieve the automatic control, can be applied to high-end users.
Main Features
- Having high-performance DFB laser, this device has narrow spectrum, high linearity as well as high output power stability.
- Advanced pre-distortion technique, which effectively improves whole device’s non-linearity performance
- Cutting-edge microcomputer auto-monitoring-and-control circuitry, which is able to precisely monitor and control the output power and operating status of the laser, thereby to stabilize output power and improve the life span of the laser.
- LCD or VFD display installed on front panel, each real-time operating status parameter can be shown.
- Having high-performance switch mode power supplier unit which has perfect over-voltage and over-load protection functions, device’s safe operation over long run is secured.
- Standard 19” 1U rack, plus RS485 or Ethernet element management port, remote management is easily realized.
Specifications
Parameter | Unit | Index |
Working wavelength | nm | 1310±20 |
Laser Type | | DFB Laser |
Optical Modulation Mode | | Direct Light Intensity Modulation |
Side mode suppression ratio | dB | ≥45(SMSR) |
Extinction ratio | dB | ≥20 |
Noise equivalent intensity | dB/Hz | ≤-160 |
Output power | mW | 2-30 |
Reflection loss | dB | ≥55 |
Fiber connector | | FC/APC or SC / APC |
Working bandwidth | MHz | 47~862 |
Input level | dBμV | 75±3 or customized |
Flatness | dB | ≤±0.75(47~862MHz) |
Reflection loss | dB | ≥16(47-550MHz) ≥14(550-862MHz) |
RF Test Port | dB | -20 |
AGC control range | dB | ±10 |
MGC control range | dB | ±10 |
Input impedance | Ω | 75 |
Test channel | | PAL-D/60CH,NTSC/80CH |
CNR | dB | ≥52 |
CTB | dB | ≥67 |
CSO | dB | ≥63 |
Network management interface | | RJ45(SNMP) , RS485 |
Power supply | V | 90~265VAC or -48VDC |
Power consumption | W | ≤50(Single supply operation) |
Working temperature | °C | -5~65 |
Storage temperature | °C | -40~85(Automatic chassis temperature control) |
Relative humidity | % | 5~95 |
Dimension | " | 19(W)x14.5(D)x1.75(H) |
Test conditions:
To transmit analog TV signal in 47-550MHz frequency band and digital signal in 550-862MHz frequency band, where digital signal should have a 6-10dB lower level than analog signal, optical receiving power is -1dBm.
Pictures of product :
Any question, you can also contact me by Skype:
For more Optical Transmitter :
For more Yitong Technology products :
Any question, you can also contact me by Skype: