Brief Introduction
YTOR175STH Indoor Optical Receiver is a product for fiber to building or hallway solution, and it’s an ideal product fitting today’s EPON network. Having AGC function, optical receiving power range can be specified by customer so that a constant output level could be attained at varying optical input power. By using highly responsivity photo-diode, it has superb CNR performance at extremely low input power. RF output has either 1-port or 2-port configurations with multiple levels to be chosen from. Network management connection interface uses Ethernet port.
Main Features
- Adopts highly responsivity photo-diode and primary stage uses low noise RF amplifier module, this receiver has excellent CNR performance.
- Having AGC function, its output level is constant. Nominal AGC range is -6~+1dBm, and it can be tailor made as well.
- Having 1-port or 2-port output configurations, output level can be specified between 100~114dBuV.
- Having optical input power alarm and online monitoring function to ease installation and maintenance job for users.
- Has Ethernet network management port to ease remote monitoring.
- Low power consumption and has super reliability.
- Switch mode PSU has excellent thunder-proof function and it fits with any power supply network.
Specifications
Item | Unit | Spec. |
Optical Spec. |
Operating Light Wavelength | nm | 1290~1570 |
Optical Receiving Power | dBm | -9~+3 |
AGC Range | dB | 7 |
Fiber Connector | dB | SC/APC or FC/APC |
RF Spec. |
Frequency Range | MHz | 47~862 |
Output Level | dBuV | 100~114 |
Flatness | dB | ±0.75 |
Return Loss | dB | ≥16(47-550MHz), ≥14(550-862MHz) |
Output Impedance | ohm | 75 |
System Spec. |
CNR | dB | ≥52 |
CTB | dB | ≥67 |
CSO | dB | ≥63 |
Others |
Supply Voltage | Vac | 35~90 or 135~270, 50Hz |
Power Consumption | W | 8 |
Operating Temperature | °C | -20~+55 |
Storage Temperature | °C | -40~+70 |
Relative Humidity | % | Max 90 without condensation |
Test conditions:
Transmit analog signal in 47~550MHz frequency band and digital signal in 550~862MHz frequency band, respectively, where digital signal should have a 6-10dB lower level than analog signal, optical receiving power is -1dBm.
Any question, you can also contact me by Skype:
Customers who bought this product will also consider our following products:
For more Yitong Technology products :
Any question, you can also contact me by Skype: